EVO-BOND, acrylic composition for adding to cement mixtures for better workability and unequalled render adhesion to non porous surfaces
 

EVO-BOND

 
products-header.jpg
 

EVO-BOND PRODUCT INFORMATION


DESCRIPTION

100% ACRYLIC EMULSION ADDITIVE

EVO-BOND is a 100% ACRYLIC INDUSTRIAL STRENGTH admixture. A longer lasting acrylic composition for adding to cement mixtures for better workability and unequalled render adhesion to non porous surfaces.
It is a special non-corrosive, non-flammable, non-carcinogenic, biodegradable and non-hazardous formulation with no solvents or other aggressive chemicals.

APPLICATION FIELDS:

  • General industrial, commercial and residential.

  • Skim coating over old concrete and masonry surfaces.

  • Masonry, brick, block structures, walls, sloping floors.

ADVANTAGES:

  • Not sticky on trowel.

  •  Enhances strength, durability and adhesion of cement based materials.

  • Suitable for formulation of conventional lightweight renders and coatings, waterproofing systems, patching and repair mortars.

  • Replaces hacking and chicken wire to walls before plastering painted surfaces.

  • Dries quickly and hardens all cement repairs in less than 30 minutes.

  • No degradation or colour development to exterior exposure.

SURFACE PREPARATION:

Preparation of the surface
Remove all loose material and remove build-up of efflorescence, dust and grime.
Brush EVO-BOND onto surface or area to be repaired first to pre-prime

If required use EVO-POWERCLEAN

COVERAGE:

4.5 litres mixes with 25 kg of sand and cement mixture. Coverage depends on thickness of coat and roughness of surface.

APPLICATION:

Should incorporate mixed 4:1 with clean water and increases adhesion to non porous surfaces. Apply sand/cement mixture as per industry practise. Apply mortar mix while prime coat is still wet.

CLEANING:

Tools and equipment should be cleaned immediately with water after use.